10 Microns Filter Rust Impurities OEM 10 Inch Cartridge Filter Housing

Stainless Steel 304/316 1-160t /H Cartridge Filter Housing

Product introduction

The prefilter is the first coarse filter equipment for the whole house water, which can filter large particles such as silt, rust, worm eggs and red insects in tap water.
The front filter is generally installed in the front end of the pipeline, so it is named as "front".
"Filtering", however, refers to the basic principle of such a device

Product parameters

Introduction

The prefilter is usually a "T" shaped structure.
The left and right ends of the above "horizontal" position are respectively inlet and outlet.
The bottom "vertical" position is the fuselage and the inner cylindrical filter screen, and the bottom end is the sewage outlet, which is controlled by a valve to open and close.
The accuracy range of the strainer varies from 5 to 300 microns according to different brands and models.
The main removal of the pipeline produced by the precipitation impurities and bacteria, microbial debris, rust, sand and other particles of more than 5 micron impurities, to avoid human body and skin injury;
Moreover, it plays a positive role in protecting downstream pipes, water purifiers, water heaters, washing machines, high-grade faucets and sprinklers. The prefilter can also add "hydrochloric acid rephosphorization" scale inhibition filter element to the solar energy and water heater.
It is usually installed after the water meter of the inlet pipe to ensure that the large amount of precipitation and impurities produced in the pipe network will not cause harm to human body, and play a positive role in protecting the hidden pipes, faucets, electrical appliances, etc.
Prefilter is the killer of secondary pollution and is a reliable impurity filtration device

Application

Factory introduction

Packaging logistics

FAQ

Q1. How can we get the quotation of flter cartridges
A: Kindly please let us know the specifications, such as the material, length, micron, adapter, apply in which industry.
Q2. How about your delivery time?
A: Generally, it will take 20 to 25 days after receiving your advance payment. The specific delivery time depends on the items and
the quantity of your order. and if the item was non standard, we have to consider extra 10-15days for tooling / mould made.
Q3. Can you produce according to the samples or drawings?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q4. How about tooling Charge?
A: Tooling charge only charge once when first order, all future orders would not charge again even tooling repair or under maintance.
Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.