20 Inch Precision 1 Micron Ss Mesh Filter Sewage Treatment

20inch Precision Filter Sewage Treatment Stainless Steel Filter Mesh

Product introduction

Stainless steel sintered mat filter element is mainly made of stainless steel fiber sintered mat and stainless steel braided net processed by folding process. Stainless steel fiber sintered mat can be made into a multi-layer structure with pore diameter from coarse to fine, with high porosity, high pollution carrying capacity and other characteristics.Stainless steel woven mesh is made of stainless steel wire of different diameters, made of filter element has good strength, not easy to fall off, easy to clean, high temperature resistance, economic use and other characteristics.

Product parameters

Product features

• 1, stainless steel precision filter element with high porosity, good air permeability, small resistance, low use pressure difference;
• 2. After the stainless steel precision filter is folded, the filter area is large and the pollution is large;
• 3, Stainless steel precision filter element high temperature resistance, corrosion resistance, suitable for high viscous liquid filtration;
• 4, good regeneration performance, after chemical cleaning, high temperature and ultrasonic cleaning can be used repeatedly;

Cleaning method

• 1. Generally choose backwashing on the production line: first close the pipe switch of raw solution and filtrate, rinse with bacteria-free water, input from the original outlet, discharge from the inlet or the lower drain hole of the filter, backwashing should have pressure but not too large, generally about 5kg.
• Cleaning fluid is generally available:
• A. Sodium hydroxide, 0.1 nNaOH
• B.1-2% citric acid solution or 0.1N oxalic acid solvent, 0.1N hydrochloric acid solvent.
• C. Enzyme solvents and other solvents are generally cleaned at a temperature of 30-40 degrees is the best.

Factory introduction

FAQ

Q1. How can we get the quotation of flter cartridges
A: Kindly please let us know the specifications, such as the material, length, micron, adapter, apply in which industry.
Q2. How about your delivery time?
A: Generally, it will take 20 to 25 days after receiving your advance payment. The specific delivery time depends on the items and
the quantity of your order. and if the item was non standard, we have to consider extra 10-15days for tooling / mould made.
Q3. Can you produce according to the samples or drawings?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q4. How about tooling Charge?
A: Tooling charge only charge once when first order, all future orders would not charge again even tooling repair or under maintance.
Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.