Stainless Steel water filtration Silver Metal Filter Cartridge

Sintered Wire Mesh Filter Cylinder Porous Filter Screen Tube Stainless Steel Filter Cartridge

Stainless Steel Filter Cartridge Introduce

Stainless steel sintered mesh filter element is referred to as stainless steel sintered filter element. The filter element is made of standard five-layer sintered mesh after superposition and vacuum sintering.Stainless steel sintering network filter material is stainless steel sintering network, sintering network is divided into protective layer, filter layer, decentralised, skeleton, skeleton layer five parts, which is both homogeneous and stable filtration precision and the filter material has higher strength and stiffness, high pressure strength and filtration precision requiring uniform is a kind of ideal filter material.

Stainless Steel Filter Cartridge Property

Stainless Steel Filter Cartridge Character

High strength, good rigidity: with high mechanical strength and overall rigidity, processing, welding in the assembly of good, easy to use.

Uniform and stable precision: uniform and consistent filtration performance can be achieved for all filtration accuracy, no change in the use of mesh.Widely used environment: it can be used for continuous filtration under -200℃-600℃ acid-base environment.

Easy to clean: due to the use of *** countercurrent cleaning effect of the surface filtration mechanism, cleaning simple, can be repeated long service life.

Stainless Steel Filter Cartridge Manufacturing Technique:

The most important difference between stainless steel sintered filter elements and other filter elements is that a large number of high-precision welding processes are used. The stainless steel sintered metal mesh shall be welded after being rolled round, and the roundness shall be ensured for welding. After welding, the weld shall be smoothed, so as to make the whole look beautiful and prepare for the next step of integral welding.

Then, the sintered net is welded on both ends of the cap through the stainless steel wire. During the welding process, the sintered net cannot be burned out to prevent local burn out and breakdown, thus causing the filter element to fail to perform filtration. Therefore, argon gas protection must be carried out for the welding environment during the welding process. In the above welding process, all welding tooling and special welding equipment must be installed, and the welding technology requirements for workers are also relatively strict. In case of air leakage in the bubble test within the pressure range after welding, the filter elements will all be scrapped.

Stainless steel sintering filter material of production process is complex, expensive, but the use effect is good, and can be repeatedly used, so the long term business accounting the price also is not high, in addition, if choose the product specifications, we often produce such specifications of the filter, we often do, tooling and welding equipment, skilled workers, the price would be low, also can shorten the time limit, if non standard models, you need to open new mold, and production tools and other auxiliary equipment, the cost would be higher.

Company Display

Stainless steel sintered mesh filter element is referred to as stainless steel sintered filter element. The filter element is made of standard five-layer sintered mesh after superposition and vacuum sintering.Stainless steel sintering network filter material is stainless steel sintering network, sintering network is divided into protective layer, filter layer, decentralised, skeleton, skeleton layer five parts, which is both homogeneous and stable filtration precision and the filter material has higher strength and stiffness, high pressure strength and filtration precision requiring uniform is a kind of ideal filter material.