Pharmaceutical Grade Spring Water 0.1mpa Cartridge Housing

Pharmaceutical Grade Stainless Steel Sanitary Filter Housing SS304 Material Spring Water Cartridge Filter Housing:

Cartridge Filter Housing Property:

Cartridge Filter Housing Method of use:

1. Thoroughly clean the filter and filter connection parts, and properly install the filter element and shell.

2, before starting to check whether the pressure pump clockwise, check whether the connection is tight, whether the valve is closed.

3. Slowly open the inlet valve before starting, exhaust gas, and then open the outlet valve for normal filtration.

4. If the filter pressure difference is greater than 0.1mpa or the flow rate drops significantly, it indicates that most of the pore diameter of the filter element has been blocked. It is suggested that the customer clean or replace the filter element.

Cartridge Filter Housing Structural Features :

Stainless steel microporous filter is composed of folded microporous membrane filter element and stainless steel outer barrel, which is equipped with single or multi-core filter element. The filter barrel is connected with quick-mounting clamp or quick-opening ring bolt, which is very convenient for loading and unloading filter elements and cleaning filter.The inner surface of the filters was treated with mirror polishing (roughness Ra≤0.28 m), and there was no sanitary dead Angle, which met the requirements of "FDA" and "GMP"

The microporous filter is divided into chemical grade and food grade. The food grade must be manufactured according to FDA standards. The filter is made of high-quality stainless steel (304/316L), with fine polishing inside and outside and no dead Angle.It is characterized by small volume, light weight, easy to use, large filtration area, low plugging rate, fast filtration, no pollution, good thermal and dilute stability and chemical stability.

This series of stainless steel microporous filter can filter out most of the particles, so it is widely used in fine filtration and sterilizing process.

The filter cartridge has 1 core, 3 core, 5 core, 7 core, 9 core, 11 core, 13 core and 15 core

The length of folding filter element is 10, 20, 30 and 40

Filter material has polypropylene, polytetramine, acetate fiber

Filter aperture: 0.1um, 0.22um, 1um, 3um, 5um, 10um

Hydrophobicity (suitable for gas) and hydrophilicity (suitable for liquid) filter elements can be selected according to needs

Cartridge Filter Housing Features:

Microporous filter element: polypropylene film (PP) filter element, polytetrafluoroethylene microporous filter element

Membrane (PTFE) filter element, acetate fiber membrane (CN-CA) filter element, filtering precision from 0.1-60um, length of 10;20;30 and 40 inches (i.e. 250;500;750;Four kinds, above filter element, withstanding pressure of 0.42mpa, recoilable.There are two types of interface: insert type (222, 226 seats) and mouth type.

Turn on the hepa filter

When the microporous filter leaves the factory, the user must be equipped with different filter elements of different forms and materials according to the purpose of filtration, the condition of medium and before use.For example, pharmaceutical water in GMP factory can be used in tandem with two groups of 5um and 1. Oum folding membrane simple filter element.In the fermentation industry, air filtration, as shown in the figure, can be used to sterilize the incoming air, remove phage filtration, or seal off the exhaust gas for treatment, meeting the American bacterial filtration standards for HIM.

Shipping:

The factory pictures: