|
Product Details:
Payment & Shipping Terms:
|
| Usage:: | Liquid Filter | Thickness:: | 0.036mm---4mm |
|---|---|---|---|
| Mesh Count:: | 2-635 Mesh | Filter Rating:: | 98% |
| Length:: | 30m/roll | Width:: | Customer's Requirement |
| Wire Diameter:: | 0.018-2.03mm | Material: | Food Grade Stainless Steel |
| High Light: | 30m/roll fine filter mesh,2.03mm fine filter mesh,4mm fine filter mesh |
||
5 micron stainless steel filter mesh screen ultra fine mesh filter fabric
Fine Mesh Filter Fabric property:
| Usage: | Liquid Filter |
| Thickness: | 0.036mm---4mm |
| Mesh count: | 2-635 Mesh |
| Filter Rating: | 98% |
| Length: | 30m/roll |
| Width: | Customer's Requirement |
| Wire Diameter: | 0.018-2.03mm |
| Material | food grade stainless steel |
Fine Mesh Filter Fabric Introduce:
Filter is generally applied in the automobile engine, it is mainly through the filter paper to filter impurities or gas important accessories, in order to ensure that the engine can absorb clean air, so the quality requirements of air filter is relatively strict.
Fine Mesh Filter Precautions for making filter :
1. Low-priced filter paper cannot be used to make the filter element. Due to its large aperture, poor uniformity and low filtration efficiency, harmful impurities to the engine cannot be effectively filtered, resulting in premature wear of the engine.
2. Low quality adhesive cannot be used, because it is not oil-resistant and cannot be firmly bonded, which may easily cause short circuit at the bonding point of the filter element;Do not use a staple at the seam of the filter element. Because it cannot be sealed, short circuit will cause a large number of harmful impurities to enter the engine and reduce the service life of the engine, so special attention should be paid.
3. The material of the center pipe of the oil filter should not be thin instead of thick, because the strength is not enough, it is easy to suck the center pipe hollow in the process of using, and the filter element is damaged and blocks the oil circuit, resulting in insufficient lubrication of the engine;Or the reliability of the bite is poor, during the use of the bite opened, resulting in a large number of oil leakage in a short time, resulting in burning tiles, shaft, this also needs to pay attention to.
4. Can't be replaced by ordinary rubber oil resistant rubber articles, in the process of using or filter internal short circuit formed by the internal seal seal failure cause engine early wear and cutting life or expansion deformation of external the seals, oil filter outside sealing ring out, a short time, a large number of drainage, make the engine burn watts, holding shaft, suffered severe damage, so you need to pay special attention to.
Fine Mesh Filter Fabric transport:
Fine Mesh Filter Fabric packaging:
Contact Person: Hu
Tel: 008617367951718
Fax: 86-0318-8062880
